ATTENTION: Due to the impact of the COVID-19 Virus, our normal lead times for service and sales may be extended. We thank you for your understanding and will do our best to communicate any delays to you.

ERD 05K: Dielectric Strength tester 5Kv

imgprincipal

HIPOT Dielectric Strength tester 5Kv / 200 mA - IEC 60335-1 / IEC 60598-1.

Dielectric Strength Test, refer to the equipment according to their isolation to a test voltage of 1000 VAC and 2500 VAC, with a current limit of 5 mA (in some cases 30 mA).

Main Specifications

  • done Test Voltage: up to 5000Vca.
  • done Current Limit: 5mAca.
  • done To test apparatus Class I.

The IEC 60335-1 in Annex A, provides the following tests at 100% of the production:

  • add Dielectric Strength Test, refer to the teams according to their isolation to a test voltage of 1000 VAC and 2500 VAC, with a current limit of 5 mA, and in some cases 30 mA. This essay has the peculiarity, that to ensure proper testing is often necessary to do with the equipment powered and not passive, primarily in facilities that have relays, contactors or electronic circuits.

In the case of the lights, IEC 60598-1, provides in Annex Q, the following activities:

  • add Dielectric Strength Test, refer to the teams according to their isolation to a test voltage of 1500 VAC, with a current limit of 5 mA. Or:
  • add Insulation Resistance Testing with a voltage of 500 Vdc, where it should not be less than 2 Megohms.
  • add Polarity test, when it is necessary for the proper functioning of the fixture.

These tests performed in a production line, required by the manufacturer of the apparatus necessary to ensure its implementation and registration. This makes this process can become a bottleneck on the line.

TECHNICAL SPECIFICATIONS

Power Supply
220Vca, 50 Hz, 6 A, single phase (115 Vca optional).
Test specifications
done Test Voltage: 0 - 5000Vac.
done Current Limit: 5 mAca.
done To test apparatus Class I.
Indicators
done Display LCD 2 línes.
done LEDs OK or FALLA.
done Audible.
Control
Totally controlled by microprocessor.
Accesories Included
done Plug Test.
done High voltage tip.
done Verification SET (optional).
Dimensions
400mm x 350mm x 225mm (h).
Weight: 25 Kg.
Guarantee
12 months.
According to
IEC 60335-1 Annex A.
IEC 60598-1 Annex Q..

©2019 SECOM. Todos los derechos reservados.