ATTENTION: Due to the impact of the COVID-19 Virus, our normal lead times for service and sales may be extended. We thank you for your understanding and will do our best to communicate any delays to you.

DPCA 06 | DPCA 12: Water Jets IPX5 & IPX6

imgprincipal

DPCA 06 | DPCA 12

Water Jets IPX5 Ø6,3mm + Water Jets IPX6 Ø12,5mm - IEC 60529.

Water Jet Hose Nozzle.

The test is made by spraying the enclosure from all practicable directions with a jet of water from a standart test nozzle as shown in figure 6 from IEC 60529.

DPCA 06: Water Jets Ø 6,3mm

Water Jets Ø 6,3mm for test IPX5.

This device is used for the verification test of the degree of protection to the risk of water penetration provided by the wrapper of equipment in fulfillment of the second digit No. 5 (IPX5) and No. 6 (IPX6) according to the IEC 60529 Section 14.2.5.
The device is a specific Water Jet Hose Nozzle to throw a jet of water. Their use is described in paragraph 14.2.5 of IEC 60529.

DPCA 12: Water Jets Ø 12,5mm

Water Jets Ø 12,5mm for test IPX6.

This device is used for the verification test of the degree of protection to the risks of water penetration provided by wrapper of equipment in compliance with the second digit No. 6 (IPX6) according to IEC 60529 Section 14.2.6.
The device is a specific Water Jet Hose Nozzle to throw a jet of water. Their use is described in paragraph 14.2.6 of IEC 60529.

Both are made on brass and are chrome plated.

TECHNICAL SPECIFICATIONS

Material
Brass
Diameters
add Ø 6,3 mm
add Ø 12,5 mm
Guarantee
12 months.
According to
done Figure 6 of IEC 60529.

PHOTOS

©2019 SECOM. Todos los derechos reservados.